Re: AMC V8 Dual PS Pump Brackets

FSJ Related Vendors Only -- (New & Used Parts)

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Thu Dec 24, 2009 12:41 pm

$85. shipped priority for the full unpainted bracket set, bolt kit including zinc plated steel spacers.
View my ebay listing at: http://www.ebay.com/itm/300656434292?it ... m=&vxp=mtr

>>>These will ship with metric pump bolts unless you specify your pump is std thread with the flared hose fitting. (Unless you've put a round can reservoir on your std pump, any factory or aftermarket round can pump will most likely be metric with the 0-ring hose fitting.<<<

If you aren't a member here but want to contact me you can go to my hydroboost page at IFSJA to get my ebay listings and contact me through ebay: http://www.ifsja.org/forums/vb/showthread.php?t=106056
Or.... you can just email me at:

sterlingworth16 at yahoo dot com


Image

Image

Image

Image
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Sun Jan 10, 2010 2:39 pm

This shows how the parts orient on the pump for installation:

Image Image Image Image
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Sun Jan 10, 2010 3:18 pm

Here it is fit to the AMC V8:

Image

Here is how you will want to plumb it:

Image

If you move your radiator overflow tank to another spot this is one place you can locate the remote reservoir for this pump setup:

Image
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Fri Jan 22, 2010 8:24 pm

If you want to see more pics of how I worked this up from scratch then check out my thread in the Offroad FSJ Tech section at:
viewtopic.php?f=5&t=166
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Sun Jul 18, 2010 7:51 am

If you need a pump with the round can reservoir I try to keep a couple of those on hand to sell @ $45.
Occassionally I get a request for the AMC PS brackets so I also try and keep a set of those available @ $45. (these brackets aren't being sold separately, just if you are buying dual pump brackets as the dual pump system is what I'm trying to help guys put together and I can't get these brackets very often).
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Wed Oct 27, 2010 7:09 am

I still have these brackets.
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Sat Nov 20, 2010 6:58 pm

I have a couple of sets left before I make another parts run at the laser shop...
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Fri Jan 21, 2011 10:01 pm

I'm currently working with a new laser shop to offer these cheaper, sold out of all that I currently have but I'm not far from having more of these brackets in stock....
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Tue Mar 15, 2011 3:52 pm

I have a new supply of these in stock now.
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Mon May 30, 2011 9:36 am

Pricing adjusted to reflect the cost decrease in the laser work.
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Fri Jan 27, 2012 3:26 pm

I have kits ready to ship for these....

Contact me here, on ebay at sterlingworth16 or email me at:

sterlingworth16 at yahoo dot com
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Sun Nov 18, 2012 8:06 am

Have a few sets of these left
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Tue Dec 10, 2013 5:28 pm

Had a whole new batch of these cut so if you are interested get a hold of me or check them out on ebay.
Thanks all
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Sat Jan 25, 2014 1:22 pm

bump
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm

Re: AMC V8 Dual PS Pump Brackets

Postby Elliott » Tue Dec 13, 2016 9:30 pm

still selling these, sell quite a few actually
Elliott
Site Admin
Site Admin
 
Posts: 412
Joined: Tue Apr 21, 2009 6:54 pm


Return to Vendors

Who is online

Users browsing this forum: No registered users and 1 guest

cron