Good one JeepDreamer.
Welcome.
TxFSJa
Texas Full Size Jeep Association
Welcome!
59 posts
• Page 3 of 4 • 1, 2, 3, 4
Re: Welcome!
by Murphy » Mon Apr 27, 2009 10:11 pm
Welcome SnowShoe. Good to see you guys made it over.
Good one JeepDreamer. Welcome.
Good one JeepDreamer.
Welcome.- Murphy
Re: Welcome!
by Cohiba54 » Wed May 06, 2009 10:49 am
Good Day to All!
Dang, I've been beating my head for a few weeks trying to get the old Texas FJS site. Couldn't get a response from the admin.....
thanks to TexTJ209 and WaveHunter over @ ifsja.org I'm finally here.\
Now let's have a get together, have some eats and shoot some pics...... I know mother's day is this weekend so lets plan on getting together soon, even if it's just the Houston Boyzzzzz.
See yal
Dang, I've been beating my head for a few weeks trying to get the old Texas FJS site. Couldn't get a response from the admin.....
thanks to TexTJ209 and WaveHunter over @ ifsja.org I'm finally here.\
Now let's have a get together, have some eats and shoot some pics...... I know mother's day is this weekend so lets plan on getting together soon, even if it's just the Houston Boyzzzzz.
See yal
'82 Cherokee
The Done Been Did List
CC Fixed
Exhaust Leak Fixed
Vacuum Leaks Fixed
Tranny Fixed
Oil Leaks Fixed (all but one, I can't quite figure it)
The Need To Get Done List (that i know of)
I Don't want to go there!!!!
The Done Been Did List
CC Fixed
Exhaust Leak Fixed
Vacuum Leaks Fixed
Tranny Fixed
Oil Leaks Fixed (all but one, I can't quite figure it)
The Need To Get Done List (that i know of)
I Don't want to go there!!!!
-
Cohiba54 - Member
- Posts: 13
- Joined: Wed May 06, 2009 10:34 am
- Location: Richmond, Tx
Re: Welcome!
by Slick Willie » Wed May 06, 2009 12:19 pm
I'm back. Well, the jeeps still down, but I'm back. :peanut gallery applaud:
I'm working on getting a new place West of Tyler with lots of land and such. If it goes through smooth, we can have a big BBQ or fish fry around September if y'all want. I'll have a cook trailer and some shade.
I'm working on getting a new place West of Tyler with lots of land and such. If it goes through smooth, we can have a big BBQ or fish fry around September if y'all want. I'll have a cook trailer and some shade.
'08 Ford F-350 Crewcab 4x4 Diesel with the 6 speed manual (dd/tow)
'86 Wagoneer 360/727/Stak 3 speed/HP60/FF14/welded 4.10's/~3" Front Springs/Chevy 63's/42's/hummer beadlocks/topless/8 point cage/half doors
'86 Wagoneer 360/727/Stak 3 speed/HP60/FF14/welded 4.10's/~3" Front Springs/Chevy 63's/42's/hummer beadlocks/topless/8 point cage/half doors
-
Slick Willie - Forum Newbie
- Posts: 4
- Joined: Mon May 04, 2009 8:24 am
Re: Welcome!
by Murphy » Sat May 09, 2009 9:07 pm
Slick Willie wrote:I'm back. Well, the jeeps still down, but I'm back. :peanut gallery applaud:
I'm working on getting a new place West of Tyler with lots of land and such. If it goes through smooth, we can have a big BBQ or fish fry around September if y'all want. I'll have a cook trailer and some shade.
Welcome guys. You and Cohiba54 should put something in the events section when you have the details nailed down or ask for opinions for the best time.
- Murphy
Re: Welcome!
by Whiplash » Sun May 10, 2009 10:11 pm
Alright this is great!
Been a long time comin'
Been a long time comin'
'78 Widetrack Cherokee
4bbl360-TH400-1339 QT w/part-time kit
status : all stock,for now
"Free yuh mind and yuh ass will follow"
4bbl360-TH400-1339 QT w/part-time kit
status : all stock,for now
"Free yuh mind and yuh ass will follow"
- Whiplash
- Member
- Posts: 14
- Joined: Sun May 10, 2009 9:53 pm
- Location: DFW
Re: Welcome!
by Lost in Texas » Sun May 24, 2009 9:20 pm
Great to see some action from Texas. Hope there are a few in the panhandle / Lubbock area. I would like to request a special forum for lowering and cruisers. Seems like JP magazine finally puts a FSJ in there and they WASTE the pages with a (ugly, poorly built) lowered WAG 
Prov 27:17 "as steel sharpens steel so man sharpens man"
- Lost in Texas
- Forum Newbie
- Posts: 3
- Joined: Mon May 18, 2009 9:57 pm
- Location: Lubbock Texas
Re: Welcome!
by Larry » Wed Jun 10, 2009 4:29 pm
Lost in Texas wrote:Great to see some action from Texas. Hope there are a few in the panhandle / Lubbock area. I would like to request a special forum for lowering and cruisers. Seems like JP magazine finally puts a FSJ in there and they WASTE the pages with a (ugly, poorly built) lowered WAG
First, welcome to the forum. I just saw this, sorry it took so long.
Try starting a thread for them in the general discussion section. If it gets a lot of positive responses a separate forum can be created and the thread(s) moved over to it.
- Larry
- Master Mechanic
- Posts: 130
- Joined: Mon Apr 20, 2009 1:26 pm
Re: Welcome!
by JpX » Wed Jun 24, 2009 6:10 pm
Hey guys!!
I've been out of the scene while my J10 spent a year and a half in storage in Colorado. I finally shipped it back this month and can't wait to get to work on it again. Hit the IFSJA site and noticed TxFSJa was open for business.
I've been out of the scene while my J10 spent a year and a half in storage in Colorado. I finally shipped it back this month and can't wait to get to work on it again. Hit the IFSJA site and noticed TxFSJa was open for business.
76 J10 1996 GMC 350 "stroker" 5 spd NV4500 NP241 No Lift and no 4wd yet. Texas resident once again! http://www.ifsja.org/forums/vb/showthread.php?t=66657
-
JpX - Forum Newbie
- Posts: 1
- Joined: Wed Jun 24, 2009 5:49 pm
- Location: Houston Heights
Re: Welcome!
by Murphy » Thu Jun 25, 2009 8:59 pm
Welcome to the forum!
If you want to do that build thread that is linked in you sig in the Tech Section here, it would probably end up in the 'Builds' archive.
I bet you can't wait to get some grease under your fingernails again.
Welcome back.
If you want to do that build thread that is linked in you sig in the Tech Section here, it would probably end up in the 'Builds' archive.
I bet you can't wait to get some grease under your fingernails again.
Welcome back.
- Murphy
Re: Welcome!
by jeepskater433 » Sun Jul 05, 2009 11:04 pm
never checked in, so better late than never, got 3 wagoneers as of friday, new one runs, but illegal as hell(straight pipe no tags no plates), and rusted, so it will be stripped for parts for the other 2
-
jeepskater433 - Gear Head
- Posts: 64
- Joined: Fri Apr 24, 2009 11:42 am
- Location: Katy, TX
Re: Welcome!
by jdaniel83 » Mon Jul 06, 2009 11:11 pm
Hi from DFW area. Been on here for a while and just now saw this thread. It's nice to have somewhere for Texan FSJ owners to chat and help each other out.
'89 Grand Wagoneer; 360 with Holley Pro-Jection TBI, 727, 3.73 Motive gears
'66 Gladiator; AMC 327 Vigilante, T-18, 4.27 gears
'70 Wagoneer; Buick Dauntless 350, TH400, 3.73 gears
"83 Wagoneer Limited; 360; 727, Dana 44/AMC 20, 3.31 gears.
'66 Gladiator; AMC 327 Vigilante, T-18, 4.27 gears
'70 Wagoneer; Buick Dauntless 350, TH400, 3.73 gears
"83 Wagoneer Limited; 360; 727, Dana 44/AMC 20, 3.31 gears.
- jdaniel83
- Jr. Member
- Posts: 6
- Joined: Wed May 06, 2009 1:03 pm
- Location: Fort Worth
Re: Welcome!
by YJ-4BT » Fri Jul 10, 2009 5:17 pm
Hello all! I just saw this thread, otherwise I would have given a shout out before. 
-
YJ-4BT - ShadeTree Mechanic
- Posts: 21
- Joined: Thu Jun 18, 2009 12:57 pm
- Location: Midland, Texas
Re: Welcome!
by j20brett » Mon Jul 13, 2009 9:10 am
TX_4BT_J-2000 wrote:Hello all! I just saw this thread, otherwise I would have given a shout out before.
Who does this guy think he is??
-
j20brett - Grease Monkey
- Posts: 38
- Joined: Tue Apr 21, 2009 2:47 pm
Re: Welcome!
by mrcorvetteman » Fri Jul 31, 2009 9:28 pm
hi, from Corpus Christi. i'm from san antonio, but finishing up school here. hope to see some of you at the beach.
- mrcorvetteman
- Forum Newbie
- Posts: 3
- Joined: Fri Jul 31, 2009 8:48 pm
59 posts
• Page 3 of 4 • 1, 2, 3, 4
Return to General FSJ Discussions
Who is online
Users browsing this forum: No registered users and 3 guests