We offer Cable Shifters for your Dana 300, Atlas II, STaK, NP203, NP205 Transfer Cases.
The Cable Shifter Box is independant of the transfer case, coupled via the cables. This allows the user to mount the shifter box wherever required, on the floor, in a console, or even on the dash. When mounted flush, the cables exit below the mounting surface undetected.
Standard Dana 300 Dual Shifter Kit ($279):
All the Cables connect to the shift rails in double shear with our specialized adapters.
We have the Dana 300 'Reverse' system also availible for tight spaces or mounting the D300 flipped to the drivers side:
The Dana 300 reverse system is $299 and includes a 4' cable length.
We use some of the toughest, high quality push/pull cables availible. Rated to 230/350lbs of input force, and temperature rated from -65F to 230F degrees, these are designed to handle the toughest conditions. The cables are pre-permanintly lubricated, sealed with a floating wiper seal.
We also have 3 lever assemblies for Stak's, Atlas 4sp, 203/205 etc:
Prices as Follows:
Dana 300 Standard Twin Shifter Kit - $279
Dana 300 Reverse Twin Shifter Kit - $299
Atlas II Twin Shifter Kit - $279
Atlas 4sp Triple Shifter Kit - $339
STaK 2 Speed Twin Shifter Kit - $279
STaK 3 Speed Triple Shifter Kit - $349
NP205 Twin Shifter Kit - $329
NP203/NP205 Triple Shifter Kit - $379
You can see our product page by clicking HERE!
For more infomation feel free to email us at email@example.com or call us at the shop at 250-248-6024.