Page 1 of 1
Re: AMC V8 Dual PS Pump Brackets
Posted:
Thu Dec 24, 2009 12:41 pm
by Elliott
$85. shipped priority for the full unpainted bracket set, bolt kit including zinc plated steel spacers.View my ebay listing at: http://www.ebay.com/itm/300656434292?it ... m=&vxp=mtr>>>These will ship with metric pump bolts unless you specify your pump is std thread with the flared hose fitting. (Unless you've put a round can reservoir on your std pump, any factory or aftermarket round can pump will most likely be metric with the 0-ring hose fitting.<<<
If you aren't a member here but want to contact me you can go to my hydroboost page at IFSJA to get my ebay listings and contact me through ebay:
http://www.ifsja.org/forums/vb/showthread.php?t=106056Or.... you can just email me at:
sterlingworth16 at yahoo dot com
Re: AMC V8 Dual PS Pump Brackets
Posted:
Sun Jan 10, 2010 2:39 pm
by Elliott
Re: AMC V8 Dual PS Pump Brackets
Posted:
Sun Jan 10, 2010 3:18 pm
by Elliott
Here it is fit to the AMC V8:
Here is how you will want to plumb it:
If you move your radiator overflow tank to another spot this is one place you can locate the remote reservoir for this pump setup:
Re: AMC V8 Dual PS Pump Brackets
Posted:
Fri Jan 22, 2010 8:24 pm
by Elliott
If you want to see more pics of how I worked this up from scratch then check out my thread in the Offroad FSJ Tech section at:
viewtopic.php?f=5&t=166
Re: AMC V8 Dual PS Pump Brackets
Posted:
Sun Jul 18, 2010 7:51 am
by Elliott
If you need a pump with the round can reservoir I try to keep a couple of those on hand to sell @ $45.
Occassionally I get a request for the AMC PS brackets so I also try and keep a set of those available @ $45. (these brackets aren't being sold separately, just if you are buying dual pump brackets as the dual pump system is what I'm trying to help guys put together and I can't get these brackets very often).
Re: AMC V8 Dual PS Pump Brackets
Posted:
Wed Oct 27, 2010 7:09 am
by Elliott
I still have these brackets.
Re: AMC V8 Dual PS Pump Brackets
Posted:
Sat Nov 20, 2010 6:58 pm
by Elliott
I have a couple of sets left before I make another parts run at the laser shop...
Re: AMC V8 Dual PS Pump Brackets
Posted:
Fri Jan 21, 2011 10:01 pm
by Elliott
I'm currently working with a new laser shop to offer these cheaper, sold out of all that I currently have but I'm not far from having more of these brackets in stock....
Re: AMC V8 Dual PS Pump Brackets
Posted:
Tue Mar 15, 2011 3:52 pm
by Elliott
I have a new supply of these in stock now.
Re: AMC V8 Dual PS Pump Brackets
Posted:
Mon May 30, 2011 9:36 am
by Elliott
Pricing adjusted to reflect the cost decrease in the laser work.
Re: AMC V8 Dual PS Pump Brackets
Posted:
Fri Jan 27, 2012 3:26 pm
by Elliott
I have kits ready to ship for these....
Contact me here, on ebay at sterlingworth16 or email me at:
sterlingworth16 at yahoo dot com
Re: AMC V8 Dual PS Pump Brackets
Posted:
Sun Nov 18, 2012 8:06 am
by Elliott
Have a few sets of these left
Re: AMC V8 Dual PS Pump Brackets
Posted:
Tue Dec 10, 2013 5:28 pm
by Elliott
Had a whole new batch of these cut so if you are interested get a hold of me or check them out on ebay.
Thanks all
Re: AMC V8 Dual PS Pump Brackets
Posted:
Sat Jan 25, 2014 1:22 pm
by Elliott
bump
Re: AMC V8 Dual PS Pump Brackets
Posted:
Tue Dec 13, 2016 9:30 pm
by Elliott
still selling these, sell quite a few actually