Page 1 of 1

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Thu Dec 24, 2009 12:41 pm
by Elliott
$85. shipped priority for the full unpainted bracket set, bolt kit including zinc plated steel spacers.
View my ebay listing at: http://www.ebay.com/itm/300656434292?it ... m=&vxp=mtr

>>>These will ship with metric pump bolts unless you specify your pump is std thread with the flared hose fitting. (Unless you've put a round can reservoir on your std pump, any factory or aftermarket round can pump will most likely be metric with the 0-ring hose fitting.<<<

If you aren't a member here but want to contact me you can go to my hydroboost page at IFSJA to get my ebay listings and contact me through ebay: http://www.ifsja.org/forums/vb/showthread.php?t=106056
Or.... you can just email me at:

sterlingworth16 at yahoo dot com


Image

Image

Image

Image

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Sun Jan 10, 2010 2:39 pm
by Elliott
This shows how the parts orient on the pump for installation:

Image Image Image Image

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Sun Jan 10, 2010 3:18 pm
by Elliott
Here it is fit to the AMC V8:

Image

Here is how you will want to plumb it:

Image

If you move your radiator overflow tank to another spot this is one place you can locate the remote reservoir for this pump setup:

Image

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Fri Jan 22, 2010 8:24 pm
by Elliott
If you want to see more pics of how I worked this up from scratch then check out my thread in the Offroad FSJ Tech section at:
viewtopic.php?f=5&t=166

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Sun Jul 18, 2010 7:51 am
by Elliott
If you need a pump with the round can reservoir I try to keep a couple of those on hand to sell @ $45.
Occassionally I get a request for the AMC PS brackets so I also try and keep a set of those available @ $45. (these brackets aren't being sold separately, just if you are buying dual pump brackets as the dual pump system is what I'm trying to help guys put together and I can't get these brackets very often).

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Wed Oct 27, 2010 7:09 am
by Elliott
I still have these brackets.

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Sat Nov 20, 2010 6:58 pm
by Elliott
I have a couple of sets left before I make another parts run at the laser shop...

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Fri Jan 21, 2011 10:01 pm
by Elliott
I'm currently working with a new laser shop to offer these cheaper, sold out of all that I currently have but I'm not far from having more of these brackets in stock....

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Tue Mar 15, 2011 3:52 pm
by Elliott
I have a new supply of these in stock now.

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Mon May 30, 2011 9:36 am
by Elliott
Pricing adjusted to reflect the cost decrease in the laser work.

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Fri Jan 27, 2012 3:26 pm
by Elliott
I have kits ready to ship for these....

Contact me here, on ebay at sterlingworth16 or email me at:

sterlingworth16 at yahoo dot com

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Sun Nov 18, 2012 8:06 am
by Elliott
Have a few sets of these left

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Tue Dec 10, 2013 5:28 pm
by Elliott
Had a whole new batch of these cut so if you are interested get a hold of me or check them out on ebay.
Thanks all

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Sat Jan 25, 2014 1:22 pm
by Elliott
bump

Re: AMC V8 Dual PS Pump Brackets

PostPosted: Tue Dec 13, 2016 9:30 pm
by Elliott
still selling these, sell quite a few actually